GTO GPX-SL25 Slide Gate Operator

The GPX-SL25 series will handle gates weighing up to 650 lbs. (294.8 kg) and 24 ft. (7.3 m) in length with a 20 ft. (6.1 m) opening, if all proper installation procedures have been followed. Note: Ball bearing rollers should be used on all gates.

FEATURES:

• Full systems capable "add on ready" heavy-duty control board includes adjustable obstruction sensing, gate sequencing and auto close settings (Off and 3-120 seconds).
• Includes built-in internal friction disc brake/lock.
• Chain disconnect for manual operation.
• Residential cycle rated to 100 cycles daily.
• Manufacturer's 2 year residential warranty.
• Includes gate operator, battery backup, radio receiver, entry transmitter, AC transformer, and chain.
• Solar compatible.
• Optional post mount adapters available (not included).
• Single gate capability at this time, second operator for dual gate applications available mid 2013.

MECHANICAL SPECIFICATIONS:

• Operating temp -5 F (-21C) to +160 F (71 C).
• Opening time: 1 ft. (.31 m) per second maximum.
• #41 Chain 25 ft. with master link.
• Fully compatible accessory terminal block provides connections for safety loops, exit wands, intercoms, card readers, phone systems.
• Operation, diagnostic and safety alarms.
• Inherent obstruction sensing.
• Weatherproof high density ABS, UV resistant cover
• Heavy duty steel chassis

ELECTRICAL / POWER SPECIFICATIONS:

• 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
• Battery charge is maintained by regulator on control board.
• Powered by a reliable 12 Volt (1/4 HP) DC motor, case hardened steel gear reducer.
• “Sleep draw” is 40 mA; “active draw” is 2 to 9 amps.
   

GTO GPX-SL25 Slide Gate Opener Manuals

GTO GPX-SL25 PDF Manual