LiftMaster LA400 Package 1 Includes The LA400 Residential Swing Gate Actuator/Motor $ (Model LA4000CONT) Controller For Single Or Dual Gates. The LA400 is capable of operating gates up to 16 ft. long and weighing up to 550 pounds.

The LA400 has a powerful 24VDC motor, which provides exceptional starting torque and features soft start/stop operation. This promotes longer gate and operator life, as well as dependable performance. The LA400 is capable of operating gates up to 16 ft. long and weighing up to 550 pounds.

An on-board radio receiver is included with the LA400. Exclusive from Chamberlain, this provides a single remote control solution for gates and additional access points.

Liftmaster LA400 Manual


STANDARD FEATURES

• On-Board Radio Receiver
• DC Operator System
• Battery-Run System
• Slow Start/Stop
• Inherent Obstruction Sensing
• External Obstruction Sensing
• Control Inputs
• Bi-part Latch
• Timer to Close
• LED Indicators
• Electronic Limit System
• Keyed Manual Disconnect

SPECIFICATIONS:

OPERATOR SPEED 90° in 15 seconds
POWER REQUIREMENT 24VDC
DIMENSIONS:
LA400 Linear Actuator ArmHeight: 5.5"Length: 37.5"Width: 3.75"LA400 Controller Box
Height: 14"
Depth: 6"
Width: 9"
OPERATOR WEIGHT
LA400 Linear Actuator Arm: 25 lbsLA400 ControllerBox: 25 lbs
ACCESSORY POWER
Two/24VDC Outputs
UL LISTED
UL325-Class I, II, III, IV
CONSTRUCTION
Motor: 24VDC with thermal overload protection, aluminum housing

AVAILABLE MODELS
LA400-Single linear actuator arm
LA400-CONT-Control box for single or master/second application
LA400-S-Second linear
actuator arm with junction box and direct burial cable for all master/second applications

Optional Equipment Available: 

solar panel package*
Provides complete operation of the gate operator through the use of combined solar panel and battery system. Package includes 24V 10W solar panel, 10 ft. of power cable, mounting post and hardware. Operates up to 15 cycles a day on a full battery.

master/second package*
The LA400 is available in a Master/Second package which includes a cable extension kit consisting of 40 ft. Of direct burial wire, junction box and connecting hardware. For use in applications where two gate operators are needed.

antenna package*
Allows you to put antenna in a more favorable position for optimal radio reception. 86LM package includes antenna, 15 ft. Cable and mounting hardware.

push to open option*
Optional "push to open" bracket allows the gate to swing out from the property.

ADDITIONAL OPTIONS
U-BOLT MOUNTING KITS
50-19509 (6" post mount kit)
50-19511 (4" post mount kit)
50-19512 (2.5" post mount kit)

Available Upon Request………